This file is available on your TFTP server(s), and your Jabber client will download it the same way a phone would download it’s load.īefore making any changes, you should backup your existing jabber-config.xml file. After some research, I found that most Jabber configuration settings are held in a file called jabber-config.xml. You can add a resolution by clicking in the Hardware Accelerated Camera area and selecting the desired resolution.I needed to update a few settings in Jabber for my entire organization, changing some Call Manager server IPs, and modifying the way that users searched inside of Jabber. ☐ A user-defined set of resolutions is used. You can add a resolution by clicking in the Camera area and selecting the desired resolution.Īllow default resolutions (for cameras with hardware resolution) ☑ The default resolutions of the camera are used. Separate configurations for cameras with and without hardware acceleration are possible.Īllow default resolutions (for cameras without hardware resolution) You can set the Cisco JVDI Client to use the default resolutions of the camera or to use a user-defined set of resolutions. If you leave the field empty, the default sound card of the system is used.įor further information, see Sound Preferences. Internal sound card: Here you have the possibility to define a sound card. (Default: 80%)ĭefault ring volume: Ringtone volume control. (Default: 80%)ĭefault microphone volume: Microphone volume control. Audioĭefault volume: Headphone volume control. On reboot, the device downloads and installs the software package for the Cisco JVDI Client. Go to System > Firmware Customization > Features and activate Cisco JVDI Client (Limited functionality – see product documentation for details).This is required because the appropriate software package for the Cisco JVDI Client must be downloaded in order to deploy the feature. The Server Path must point to the firmware version that is currently installed. Ensure that the settings under System > Update > Firmware Update are correct.To enable the feature, proceed as follows: This involves an additional software download and installation. The Cisco JVDI Client must be enabled explicitly.

Download cisco jabber 11.6